On Fri, May 31, 2013 at 9:46 PM, Ariel Jacala <[email protected]> wrote:
> I get a dual image on my NaP3 display.... ============== Ariel, sometimes NaP3's I-Q autobalancing gets discombobulated. It can be cured very simply by putting in a very big carrier, S9+40 or so. I have my XG-3 connected to the receive antenna input on the K3. When my NaP3 gets out of sorts (not frequent, maybe once a month) I switch over to the RX Ant, turn on the XG3 to the 0 dBm level, and tune the receiver to about 40 Khz away from the signal. This fixes the display immediately. This presumes that you do have the sound card and everything else set up correctly. If you do, this simple trick will wake up NaP3's autobalance, which will eliminate images from the display and make it perform perfectly. Tony KT0NY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
