I have an xv 222 transverter that will shut down after transmitting for about a minute.
Using FM for testing. The front panel just goes dark and I need to power cycle the k3 to get it back. I am using a K3 to drive both 222 and 432 transverters. Also, when going through the alignment process, R22 should be between .1 and 10 volts. When I adjust this the voltage will jump from about 7 to 18 volts. I discovered it had been running at this higher setting and getting about 18 watts output. When I roll the voltage at TP5 down to the correct range I get almost no output from the xvter. Any idea's. All other voltages look ok. Dave N6TEB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
