Hi, I have noted that when I use the above utility it does what I want apart from the 50MHz band. I set it to the required frequency and mode (50.250 and Data) yet when I upload that info to the K3 the mode becomes Data Rev. This does NOT happen on any other band (and I use the memories to get me to the PSK frequencies for all bands). On the other bands the frequency is correct and the mode is Data.
I have tried changing the mode on the K3 to Data then reading that into the K3 Frequency Memory Editor and then re-exporting it back to the K3 - but the result is the same. I guess it must be obvious what I am doing wrong but it sure is puzzling me at the moment!! Andy G4HUE K3 s/n 6990 P3 s/n 2493 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
