Yes they do Icom support in a way just kidding 8>). I had a question about using my KPA/KAT/500 with my IC-9100 that wasn't quite clear in the manual. That was using the 15 pin KPA500 to the IC-9100 13 pin DIN when also using the KAT500, was there any advantage in doing so, or even advisable to so. If you look at both the Elecraft manuals you will see what my foggy mind was seeing about both hookups.
As with most things not related directly to a Elecraft radio but their other equipment using them I called Howard. After a couple of minutes talking with him for the first time he told me he didn't know (that was a first) and would have someone call me back. This is the embarrassing part I cannot remember his name but he explained every aspect of both hookups and the advantages of the one I was wanting to do. The detail and in depth use of the Icom using it's interface to control the KPA/KAT500 and what it did. My main concern had been with what and if this connection had on the KAT500 either good bad or no effect over the coax and key line. The answer it was all good do the DIN connection. Again great tech support and not someone reading from a book about your problem and never giving you a real answer. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
