Not sure why this was posted to the Elecraft reflector, since this was a limited discussion about firmware being field-tested by several customers.
In any case, I'll be investigating this issue right away. 73, Wayne N6KR On Jun 12, 2013, at 12:53 PM, Jim Sheldon <[email protected]> wrote: > I just tried this and find that Reed is correct but it isn't just on 80 and > 40 because they are LSB, it happens in LSB on all bands. The SSB is clean > until you hit one DIT and then the distortion enters the picture. The > distortion is bad enough that your speech is all but unintelligible. Turning > off CW-in-SSB clears the problem and appears to do so even without recycling > power on the radio. At least it worked that way on 20 meters (the last band > I tested). > > Jim Sheldon - W0EB > > > I'll try to duplicate this. I suggest turning off CW-in-SSB until > > we resolve it. > > > > Wayne > > > > > > On Jun 12, 2013, at 12:21 PM, Reed <[email protected]> wrote: > > > >> Wayne, I noticed a problem when going to 80 & 40, guessing it is > >> because they are LSB, I hear really bad SSB transmit distortion. > >> I'm using a IC-746PRO as receiver. Transmitting into a dummy > >> load. CW tone sounds good. When I disable CW in SSB & turn rig > >> off and back on SSB audio sounds good, but as soon as I turn CW > >> in SSB on and transmit in CW then talk in mic I hear the really > >> bad distortion. This doesn't happen on USB. I just tested this > >> on USB on 40 meters and works fine, but when going to LSB and > >> after sending in CW the distortion returns when talking into mic. > >> > >> Reed W4JZ > >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
