To put it properly -

Keyed sidetone, also known as "modulated CW" is of questionable legality below 50.1 MHz. It is also poor engineering practice and generates significant QRM due to carrier leakage, noise/hum modulation,
clipping, and "open mic" noises when a microphone is also connected to
an SSB transmitter at the same time (as it would be between the
dits/dahs).

All of those issues can be observed nearly every day on most HF bands
thanks to the CW by MCW (tone keying) capabilities of both fldigi
and HRD/DM780 in the hands of users who do not understand that the
SSB transmitter and modulation needs to be absolutely pristine and
the microphone disconnected in order to generate a clean CW signal
through tone modulation.

Again, keying the sidetone into the mic input is a grotesquely bad
idea.

73,

   ... Joe, W4TV


On 6/14/2013 12:25 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Gentlemen  - Both of these posts are inappropriate and outside of the
list guidelines. Let's tone it down a bit.

Eric
List Moderator
elecraft.com

On 6/14/2013 6:13 AM, Tommy wrote:
Double BARF !!!!!

73,
Tom - W4BQF


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joe Subich, W4TV
Sent: Friday, June 14, 2013 7:56 AM
To: [email protected]
Subject: Re: [Elecraft] Point me to the note for sending CW when in, SSB
mode

Modulated CW - BARF!
73,
     ... Joe, W4TV


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to