I have a question on the KDSP2, the DSP filter for the K2
I have K2 firmware version 2.04P installed in my K2, as shown when I press
any key on power up. I also have KDSP2 firmware version 3.16 installed. as
shown on the display when entering the appropriate commands.
According to the KDSP2 Manual Errata (presently posted on the Elecraft web
site) I should be able to toggle the Autonotch and the Denoiser on and off
directly from the K2 front panel by simultaneously pressing and holding
AFIL+SPLIT and AFIL+REC, respectively.
When I do this I get a message on the LED "Not Installed" (appropriately
abbreviated, of course).
I am able to perform all of the other DSP functions except for these.
Can anyone tell me what I am doing wrong or how I can track down this
problem
Thanks in advance for your help
Tom McCulloch
WB2QDG
K2 1103
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
