Roger,
I have never seen a similar failure reported here on this reflector, and
I recommend that you try the K3 on another serial port (a real RS-232
port if possible) to determine whether it is a problem in the K3 or a
problem with the USB to RS-232 adapter in the Navigator.
73,
Don W3FPR
On 6/24/2013 8:29 AM, Roger Dixon wrote:
My set up is using the US-Navigator as a USB to RS232 interface to
communicate with the K3.
I have noticed over the years that I do not always achieve RS232
communication when the K3 is first switched on. There is normally a delay
from minimal up to a "few minutes".
On two recent occasions I have failed to achieve communication when out
portable. The only difference here is the temperature - much colder!
Has anyone else noticed similar behaviour? Currently I do not have another
USB/RS232 convertor so I cannot definitely state whether it is a K3 or a
Navigator "feature".
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
