I am trying to get Rocky 3.7 to work with my KX3 similar to the display of the P3 and my K3. I have Rocky 3.7 running on my laptop computer and Windows 8. Rx I/Q is turned on in the menu of the KX3 and the cable supplied by Elecraft is running to my Creative model SB1100 USB sound adapter. My sound adapter is several years old so may not be the same as the new ones listed on the Internet.
Rocky Soundcard info INPUT Device 04 SBX-FiGo! wFormatTag WAVE_FORMAT_PCM nChannels 2 nSamplesPerSec: 48000 nAvgBytesPerSec: 19200 nBlockAlign: 4 wBitsPerSample: 16 cbSize: 0 wValidBitsPerSample: 0 dwChannelMask: 0 SubFormat: (00000000-0000-0000-0000-000000000000) I did not include the OUTPUT data as I am not using the transmit part My problem is I get two spikes for every signal. One is the correct one but an equal sized spike is shown on the opposite side of the screen. I do not think this is normal as I don't think other hams would want a display with that problem. I have tried Rocky - View - Settings Left/Right = I/Q Left/Right = Q/I Shift Right Channel Data by -8,-7,-6,-5,-4,-3,-2,-1,0,+1,+2,+3,+4,+5,+6,+7,+8 I don't know what else to try and I do wonder if the USB sound card uses stereo for the microphone but I have not been able to find that information on the Internet. I would appreciate any help. I feel it is so close to working but not working right. Ken W0CZ [email protected] Sent from my iPad ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
