Hi All,
I have a K2 with K60XV module, and I have an XV50 transverter set up as TRN1 all working fine and K2 is showing correct frequency when using the KV50. The TRN settings are : RF 50 IF 28 OFS 0 Power out L1.00 Adr TRN1 Now, I want to add a VLF receive converter (this provides 0-150khz coverage) as TRN2 I have set this up as: RF 0 IF 28 OFS 0 Power out L0.01 Adr TRN2 I temporarily have the XV50 disconnected entirely and the VLF converter connected to the transverter IN phono socket on my K2. I have two issues: 1 The VLF converter is working on TRN1 although the frequency naturally shows 50000 to 50150Khz but it does NOT work on TRN2. No received signals at all. 2 On TRN2 the frequency readout shows a frequency of around 86Mhz - 87Mhz and no signals from the VLF converter. Can anyone suggest what I'm doing wrong here please. I'm wondering if I need to connect the VLF converter via the XV50 which to enable the switching to work correctly somehow. I'd be most grateful for any suggestions. Please copy any replies to my e mail address. 73, Vic GW4JUN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html