Hi Mike, If you hear the tones in the K3 speaker then I assume you mean that you are hearing them through the monitor. This tells me that the tones are getting through to the K3 and that you are in transmit (red light). If you are in DATA Mode AFSK A you should be able to adjust the MIC knob on the front of the K3 for proper ALC indication. You should then be able to crank up RF output with the PWR knob (unless you are in TEST mode).
73, Mike K2MK Mike Reublin wrote > Thanks to some excellent suggestions, I was able to get receive working, > but transmit is still a no-go. > > I cannot get an ALC indication. I've run the sound card volume up and down > it's range. I can hear the tones thru the K3 speaker, so they're getting > in. > > It's got to be something so simple I'll feel compelled to double dope-slap > myself. > > Mike NF4L -- View this message in context: http://elecraft.365791.n2.nabble.com/Re-K3-RTTY-tp7576460p7576463.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
