The separate receiving antenna is selected via the menu RANT setting (per band). Ant1/Ant2 is a function of the KATnnn module, and is independent of the RANT setting. If RANT is on, the 160 antenna is receive and Ant1/Ant2 controls transmit. If RANT is off (on the band in use), then Ant1/Ant2 controls transmit and receive.
Clear as mud? Dan / WG4S / K2 #2456 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of rattray Sent: Thursday, October 27, 2005 1:02 PM To: Elecraft Subject: [Elecraft] K2 - 160 mtrs I'm finally getting around to using my K2 on 160 mtrs - is the idea of the K2 that a separate receiving antenna for 160 mtrs can be attached to the bnc connector on the back (K160RX option) while using the regular bnc connector to connect to the 160 mtr antenna for transmitting? - one switches to the receiving antenna from the front panel using ANT1/2? - 72 Bruce. 72/73 - Bruce ve5rc/ve5qrp - QRP-C#1, QRP-L#886, A1 Operator Enter QRP-Canada's "RUN with RAC" contest - details - http://www.qrp-canada.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
