Mike,
The Fldigi waterfall display and the rig control/frequency display are
two different animals. The waterfall comes from the soundcard stuff and
the rig control/frequency display comes from the computer to KX3
communications over the RS-232 bus. These are independent functions.
You will have t experiment with the RigCAT or HamLib settings to get
things to work. Make sure you tell the application which COM port is
connected to the KX3. The web help pages and user forums for RigCAT or
HamLib may be of assistance.
73,
Don W3FPR
On 7/18/2013 9:01 PM, Mike WA8BXN wrote:
For some reason I can't seem to get any control of the KX3 from the PC
running fldigi. Used the elecraft utitily to verify port number and baud
rate. Set those in fldigi for hamlib. Set other parameters there as
suggested by K4MTX blog. Pressed initialized button. No error indication.
Changing dial freq on KX3 not reflected on PC, changing freq in fldigi doesn
t change XK3. Pressing T/R button in fldigi does nothing. I am able to
decode received signals with fldigi fine. I must be missing something simple
Any ideas?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
