Stan,
If you have not already, check out the K2 Dial Calibration article on my
website. Part 3 covers the filters.
If you need a copy of Spectrogram, look for a link near the bottom of my
home page.
73,
Don W3FPR
On 7/21/2013 3:22 AM, Stan AE7UT wrote:
Don thanks so much for your quick reply and help.
I went through all your suggestions and all looked great.
I then looked in Appendix E as you suggested and went through those steps.
Under problem #100 it says to check for missing audio filter options or the
bypass jumpers.
I re-soldered the jumpers and all is well. Very loud audio now even seems
better than my other K2.
Now on to the filter alignment. I build an Elecraft wide band noise
generator last night and I'm looking forward to learning how to get those
filters set up.
Thanks so much.
73
Stan AE7UT
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-7446-is-alive-and-made-my-first-QSO-tp7576940p7576953.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
