OK, After many tries, I got the configuration almost right. Since the KRC2 has no 6 meter terminal, I have tried to assign 6 meters to any terminal I am not using.
To be specific: I have a 160/80/30 dipole. I assign 160, 80 and 30 to the KRC2 80M slot. I use my 40 meter beam for 40/17/12. I assign 40/17/12 to the KRC2 40M slot. I have a tribander for 20/15/10. I assign 20, 15 and 10 to the KRC2 20M slot. I have tried to assign 6M to 10M, 160M, 17M, 12M, XV1. Every time, it winds up attached to the 20M slot. So, if I put the K3 band on 6M, the band decoder puts 12V on the 20M terminal --- not what I want. Yes, I have the switch in the "DL" position when i load, and in the "OP" position when I test. Tnx de Brian W3BW *Brian F. Wruble, C.F.A. *70 is the new 40.* * Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077 Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930 eFax 305.768.0278 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
