Hi all: I am running a newly assembled "K-Line" --- K3/100, KPA500 and KAT500. The K3 is pretty "loaded" with KRX3, KAT3, KXV3A, etc.
I just noticed that received signals are down 4 S-units when the KPA500 is in Operate. In Standby, signals pop right up. Reading past reflector emails on the topic, I found one thread that suggested this may have to do with the state of the KPA500 PTT. I found that pulling the PTT RCA plug out ended the problem. Then I replaced the PTT plug, and still had no problem. However, once I actually transmitted, and the PTT acted to key the KPA500, the problem recurred >>> Low sigs when the amp is in Operate, Full sigs when in Standby. Has anyone figured out a fix for this? 73 de Brian W3BW *Brian F. Wruble, C.F.A. *70 is the new 40.* * Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077 Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930 eFax 305.768.0278 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
