Hi guys: I have been roaming the archives and emailing with a few of you. i have determined that the method for getting the KPA500 to power up remotely is by connecting Pin 11 of the K3 ACC jack to Pin 8 on the KPA500 AUX connector. (Thanks Bob, K6XX) Then a macro can be run at the local K3/0 to cause the remote KPA500 to turn on and off.
My setup has a KPAK3AUX cable from the K3 to the KAT500 and another KPAK3AUX cable from there to the KPA500. Can anyone confirm that it is ok to tie pin 11 at the K3 to pin 8 at the KAT500 and then pin 8 at the KAT500 to pin 8 at the KPA500? Also, to avoid surgery on the heavy-duty E850463 cables from Elecraft, I thought I'd try buying a pair of straight-through DE-15 cable extenders, surgically tie pin 11 at one end to pin 8 at the other, and clip off the same pins that the Elecraft-supplied cable has clipped off. Will that work? Alternatively, can someone describe the best approach to making this modification on the Elecraft KPAK3AUX cables? Thanks again! de Brian W3BW *Brian F. Wruble, C.F.A. *70 is the new 40.* * Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077 Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930 eFax 305.768.0278 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
