OK, I need ideas.
I have my K3/100 with RemoteRig setup on the same bench as my K3/0 with
RemoteRig, plugged into the same router.
I have perfect control of the K3/100 using the K3/0, and received audio is
solid.
I have tried everything to get transmitted audio, and it just isn't
happening.
Here is the setup:
I am using a Heil ProSet Elite. * I have JMP1 removed from the control
RemoteRig ("RR")*
I have the K3/100 set for rear panel. For the mike menu options, I have
tried "HigH, and "Low", and Bias on and Bias off. Nothing makes any
difference. Of course, I have selected the rear mike jack in each case.
I have tried setting the Radio Settings on the RRs to Dual "yes" and Dual
"No"
I have tried several different "audio quality" settings, included the one
recommended in the K3/0 manual, and I always have them set up to match
between the remote and the control RR.
I have perfect CW operation, but I get a correct (locally generated)
sidetone in the right earphone, and a not-accurate (lots of dahs) sidetone
in the left earphone.
Another mystery --- when I power down on the control (K3/0) device, the
remote (K3/100) XMIT light goes on briefly as it powers down. Perhaps that
is a clue.
Can anyone suggest a process I might try that will get me up and running?
Tnx.
73 de Brian W3BW
*Brian F. Wruble, C.F.A.
*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax 305.768.0278
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
