John,

If you have the PR-6 and the P3 (without the SVGA option), then the 500 ma output from the K3 12 v jack will power both just fine (but that is the limit).

The K312MDKT is available for those who have the P3 SVGA option and want to power both the P3 and PR6 from the K3 12 volt jack - it increases the available current from 500 ma to 1 amp.

73,
Don W3FPR

On 8/18/2013 5:35 PM, John wrote:
Thanks for the help on this.
I certainly can power the P3 from the same power supply as the K3 but thought
there would have been a provision to power the P3 as well as the PR6 from the
K3.
73.
John.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to