Two possible causes for spurious signals on the P3 are
1) A bad coax jumper with a non-continuous shield (Elecraft had some at some point) , and 2) paint on the inside of the enclosure where the parts are joined. Try a new jumper cable and make sure the mating surfaces of the enclosure are sanded clean. On 8/23/2013 6:45 PM, Dale Harding K7DNH wrote:
I have noticed something the past couple of weeks... there is sometimes some type of signal showing up on the P3 that moves with the VFO.. 1. note VFO @ 225 and Mkr A 237.95 <http://elecraft.365791.n2.nabble.com/file/n7578210/DNH_1041.jpg> 2. mkr now at 237.95 - note signal 252.15 <http://elecraft.365791.n2.nabble.com/file/n7578210/DNH_1042.jpg> 3. does not matter where VFO center is... <http://elecraft.365791.n2.nabble.com/file/n7578210/DNH_1044.jpg> Sometimes it is there - sometimes it isn't. I am not educated in electronics, however it must be coming from within the radio or P3 correct? Ideas to "fix" - does it need fixing?
-- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
