I use an ANKER Astro3 10AH "battery charger" from Amazon.com and elsewhere.
Be sure you look at the one with a switchable 9volt-12volt output. It's
designed to recharge phones and pads, but puts out 12.2 volts nicely. Comes
with a plethora of adapters.
Monty K2DLJ
I use a 4S2P 5200mah LiPo battery with my KX3. It lets me run 10 watts for
a long time. I use the simple reducer in the “Articles” section of my
website (www.ad5x.com) and just remove it when convenient when the
KX3-monitored receive battery voltage drops below 14V. You can expand on
this by enclosing the reducer in a small box with a switch across the diodes
so you can short the diodes without interrupting power to the radio when the
reducer isn’t needed.
Phil – AD5X
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
