Vern,
The display has no relationship to any band. My guess is that there is
a bad solder connection on the front panel - unfortunately, it is
intermittent and that makes it difficult to fine.
If it happens again, you might try re-flowing the solder on the Front
Panel board with a hot iron (750 degF) and add just a touch of solder -
actually all you need is the flux.
73,
Don W3FPR
On 8/26/2013 1:04 PM, Vern%2C AA7VW%40comcast.net wrote:
The other day I was operating my K-2 at about 10 watts on 20 meters. After
operating without troubles for a couple of years suddenly the meter display
stopped showing any information, meaning there was no indication of power and
no indication of even strong received signals. The rig itself was operating
fine other than the meter. This didn't happen on any other band just 20 meters.
I turned the rig off and back on several times with no change. Then while the
rig was receiving on 20 meters the meter display came back on. It seems to be
operating fine again however I thought I would ask for any advic e on what
problem I might have. Thank you.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
