Frank,
Regardless of the diagrams, the turns specified in the text is correct.
Count the number of times the wire passes through the center of the core
- and yes, that last turn does pass through the center, so count it.
In other words, a straight wire through a toroid is 1 turn, a full wrap
around the core is 2 turns.
That applies to any toroid.
73,
Don W3FPR
On 9/14/2013 8:36 PM, kf4clo wrote:
Hello all
On the kfl1-4 board page 12 the green wire. says 8 turns. Fig6 A shows 8
turns then it would be folded down behind the core. Fig6 B shows 7 turns
then folded down behind the core which would make 8. (I think). Which one
shows the way it should look-A or B? Thank you for any help yall can give
me.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
