Received 3 HD15 M/F gender changers, pulled pin 11 out, attached it the end of
the KPA500 control cable, and now the KBPF3 and KPA500 work perfect! Should now
be able to use a receive only antenna on 80. My vertical is OK, but it can be
noisy.
73 DE K8CXM ... Jim
From: Jim Leder (Hotmail)
Sent: Friday, September 13, 2013 6:06 PM
To: Elecraft
Subject: KBPF3 and KPA500
I installed a KBPF3 option, and it works OK, mostly. I also have a PR6, so I
am trying to use the BYPASS connector of the PR6. I have pulled the jumper in
the PR6, so the BYPASS would would work. And it does, as long as my KPA500
cable is disconnected. When I connect the KPA500 control cable, it seems power
is ALWAYS applied to the PR6, rendering the BYPASS not connected. DIGIOUT1 is
off on all bands, except 6. When I disconnect the KPA500 control cable, all
works as it should (except the KPA500). What am I missing?
Jim Bob Buckeye
AKA
**** Jim Leder****
K8CXM since 1961
IBM retiree since 1999
There are 10 types of people in this world -- those who understand binary
and those who don't.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
