> Instead of using a notch filter, how about narrowing the DSP filter
> width to select the signal that you want.
The problem is that both solutions occur *after* the A/D converter in
the radio! One wants to get rid of the "big signal" or the multitude
of moderate signals before they saturate the ADC (or activate HAGC)
in order to maintain maximum sensitivity for the weak signals.
73,
... Joe, W4TV
On 9/23/2013 1:40 PM, Don Wilhelm wrote:
Bob,
Instead of using a notch filter, how about narrowing the DSP filter
width to select the signal that you want.
Look on the waterfall for the audio frequency of the signal of interest
and adjust the SHIFT to that center frequency, then narrow the width to
isolate that signal.
It is much more effective in reducing the strong unwanted signals than
attempting to notch them.
73,
Don W3FPR
On 9/23/2013 12:22 PM, KD7YZ Bob wrote:
On Monday Zilmer used a Straight-Key to send:
-------------Original Comment-------
I didn't word that quite right.... CW = continuous carrier. It's
very good for SW BC carriers, but not intended for broader signals
like power supply gudge.
nah, ya got it right ... there's a bunch of PSK-like tones as well as a
few spaced WSPR signals .... especially in the early morning. At that
time, for me, and on a 300 foot DP, they are really annoyingly strong. I
can neatly notch most, but the roughly 200Hz width would be neat if I
could make it wider or narrower ... like a surgical removal of
CW/Narrow-PSK modes/ WSPR
was just wondering. My K3 does so many things, most of them I haven't
discovered. Found nil in the manual; had to ask here "just in case".
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
