Bill,
I would suggest the 1/8 inch tip iron because the tip has more heat mass
and the larger surface area will transfer heat to a larger area of the
solder pads.
73,
Don W3FPR
On 9/24/2013 3:55 PM, William Moore wrote:
I am about to solder transformers T1 and T2 onto my KPA100 board and request
some guidance as to type of soldering iron to use. Equipment available to me
for soldering is a 35 watt soldering iron with a 1/8 inch wide chisel tip or
a soldering station adjustable to over 900 degrees,F, with a about a 0.8 mm
chisel tip.
Do either of these soldering tools qualify as a "heavy soldering iron" as
suggested in the instructions? Which of the two available to me would be
best to use in this application and, if neither, what type and wattage of
soldering iron would be recommended?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
