Sent from my Verizon Wireless 4G LTE DROID
-------- Original Message -------- Subject: Re: [Elecraft] K1-4 s/n. 3206 From: Scotty Long <[email protected]> To: [email protected] CC: Put all back together less the tuner now internal speaker is not working. Headphone jack normal audio. Any ideas speaker and wiring check good... Sent from my Verizon Wireless 4G LTE DROID Don Wilhelm <[email protected]> wrote: Scotty, The most common cause for that behavior is a problem with T1 - leads not adequately stripped and tinned, leads not in the correct holes, the toroid wound in the wrong direction (it must be *exactly* like the figure in the manual), inadequate soldering. One other (but less common) cause is for there to be a capacitor or inductor that is being left in the circuit. The normal cause of that is missing a solder connection to one of the relays or the firmware IC. 73, Don W3FPR On 10/5/2013 6:10 PM, Scotty Long wrote: > Just installed NB works great. > > Newly installed KAT1 page 9 no appreciable value change volts when adjusting > C9... > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
