Well I just tried nap3 and while I can get a spectrum there are so many artifacts it hardly seems worth it. In order to rule out the soundcard I bought a emu0202 and by adjusting the two inputs I can lower the images but not entirely eliminate them. I can run the optimization for images and it doesn't do much. So far the best I have obtained is with HDSdr but it really a far cry from something like the p3. How is this posdible ? I thought SDR was the next best thing! Tom
-------- Original message -------- From: Monty S <[email protected]> Date: 12/10/2013 16:40 (GMT-05:00) To: Tom <[email protected]> Subject: Re: [Elecraft] SDR software for KX3? Tom, I use NaP3 and it works fine. Sounds like you need to tell your SDR program to invert the I and Q inputs Monty K2DLJ Sent from my iPhone > On Oct 12, 2013, at 1:35 PM, Tom <[email protected]> wrote: > > Hi > Has anyone tried to hook up their kx3 via the IQ output to SDR software? > I have so far tried three different programs, hdsdr, sdr-radio, and SDR > sharp, and they are all the same. I get images that run in different > directions as I tune. I tried everything to get get rid of them to no avail. > I also tried three different sound boards and different cables. No difference > at all. Anybody have ideas? > Thanks, Tom va2fsq > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
