If you connect directly to mic/speakers on both the PC and Radio be very
careful. The PC speaker output can over drive the audio if you put it
straight to the microphone of the rig and I would always advise using
isolating transformers. You can spot people who have gone the 'straight
through to mic input' route when they overdrive their audio and produce very
wide signals.
A better option is to use Line in/Line out on the PC and interface to an
accessory socket that takes constant line levels. not lookied at the KX3
data inputs yet but if they are provided use them...
Personally, I have used a US Interface Navigator. It provides excellent
interfacing on both audio and computer connections. HRD is a bit expensive
if you want the latest version, I well remember when it was free and there
were a group of peopkle testing it and sugesting improvements and
identifying bugs...
Dave (G0DJA)
----- Original Message -----
Sent: Sunday, October 13, 2013 3:58 AM
Subject: Re: [Elecraft] Interface and Ham Radio Deluxe
Dale,
I like and use a SignaLink USB and like it. However, almost any of the
popular interfaces will work. Or, you could just use the mic and headphone
connectors on your PC and run cables to the mic and headphone connectors
on the KX3. That can work also.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
