FWIW #345 draws 39mA. No change when pulling the plug on the PR6 and RS232.
Regards,
Mike VP8NO
On 16/10/2013 18:05, Ken K3IU wrote:
Same here but only about 31ma on a Triplett 2202 DMM on K3 s/n 202.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~
On 10/16/2013 5:01 PM, Ron D'Eau Claire wrote:
I disconnected everything from my K3 except the power cable and the drain
when off remains at 38mA.
I don't have the time right now to pull the PA module, but that sounds
like
the next best possible culprit.
I had never noticed the parasitic drain because my station power
supply is
switched off when I leave the shack.
73, Ron AC7AC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
