Bypass is a tuning solution that can be remembered by by frequency bin. Just tune up at the bottom end of the band. The ATU tries bypassed as it's first test, and if the SWR is good enough! it remembers to bypass at that frequency. You can see the tuning solution on the Operate page of the KAT500 Utility.
You can set the Bypass SWR threshold to your desired value. I think it defaults to 1.2, but you can change that per band. Dick, K6KR > On Oct 27, 2013, at 9:21, Brian Alsop <als...@nc.rr.com> wrote: > > Can be bypass mode be programmed into the KAT-500 on a segment basis? > > I would only need the KAT-500 for the upper parts of the phone bands. > > Rather than having to remember to turn off/on the KAT-500 when moving > up/down, I'd rather have it automatically "remember". Ditto bypassing itself > automatically in CW segments. > > 73 de Brian/K3KO > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.2242 / Virus Database: 3222/6285 - Release Date: 10/27/13 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
