WriteLog keys the K3 just fine if "PC Generated" is selected with
"All mode PTT on RTS" checked and "CW PTT" set to "On LPT pin 16/
COMM RTS" selected in WriteLog, Cw selected on the rig control port,
COMM PTT set to NO, and PTT-Key set to rts-dtr in the K3.
73,
... Joe, W4TV
On 11/2/2013 11:20 PM, Josh Fiden wrote:
Looking at schematic for KIO3, I see that DTR and RTS are a hardware
selection to control PTT or KEY_IN via Q3-Q6 based on how U5 outputs are
commanded. This is likely a hardware problem.
Has this been seen or can anyone confirm? Thanks.
73,
Josh W6XU
On 11/2/2013 6:15 PM, Josh Fiden wrote:
I'm trying to key CW via Writelog. Writelog only allows dtr for this.
I'm testing using another program and this is what I've discovered:
1. K3 set PTT-KEY = Off-dtr and sending on dtr, K3 sits there like a
bump.
2. K3 set PTT-KEY = Off-rts and sending on rts, K3 keys CW fine.
3. K3 set PTT-KEY = dtr-Off and sending on dtr, K3 "keys" the TX LED.
Problem appears to be K3 not responding dtr when it is assigned to KEY.
Any ideas?
Thanks & 73,
Josh W6XU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
