I have had good success tinning the braid before I insert it into the PL259 body.
Then it is easy to make sure that the solder though the holes in the connector bond
to the coax shield. GL and VY 73, Lance
On 11/12/2013 2:46 AM, Randy Farmer wrote:
The only way to do UHF connectors right is with a big-a** soldering iron. I mean a
200W IRON, not a gun. You need something with enough heat capacity to heat up the
entire connector body. Once you get it hot enough, the solder will magically wick
down into the shield with no problem at all. If you plan to make PL-259s invest in
a big iron and you'll never have trouble again.
73...
Randy, W8FN
On 11/11/2013 7:31 PM, Nicklas Johnson wrote:
At risk of going way off topic, any tips for getting a nice, solid solder
connection on the shield in a reasonable amount of time? I have
historically had a really hard time getting it to the point that I'm really
satisfied with it, and I can't help but wonder if I'm doing something
wrong, or if there's a 'trick' to making it easier.
Nick
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Lance Collister, W7GJ
(ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX, 3D2LR, 5W0GJ, E6M, TX5K)
P.O. Box 73
Frenchtown, MT 59834-0073
USA
TEL: (406) 626-5728
QTH: DN27ub
URL: http://www.bigskyspaces.com/w7gj
Windows Messenger: [email protected]
Skype: lanceW7GJ
2m DXCC #11/6m DXCC #815
Interested in 6m EME? Ask me about subscribing to the Magic Band EME
email group, or just fill in the request box at the bottom of my web
page (above)!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
