Hi, I received my KX3 yesterday and I love it--I downloaded the utility and updated the firmware (see below)
07:52:13 Elecraft KX3 Utility Revision 1.13.4.29 07:52:13 OS Version 6.2 Build 9200 07:52:14 Attempting to contact KX3 on port COM4 at 19200 bit/s 07:52:14 Attempting to contact KX3 on port COM4 at 9600 bit/s 07:52:14 Attempting to contact KX3 on port COM4 at 4800 bit/s 07:52:14 KX3 MCU revision 01.61. RS-232 speed 4800 bit/s Right now the only thing I am having trouble with is the ATU. I have gone to the config and made sure it is set to auto--It read at first not inst--I double checked-(eye ball) to see if the unit was installed and it was.--When I press auto tune it comes up as N/A--- I set the vfo to 40m hit the transmit and the swr is very high I used an external ANT Tuner MFJ after I went in and by passed the tuner--and tuned 40 m to a 1.2 then I tried transmit again on the EX3 and it read 1.2 I know I am new to the unit so I believe I am doing something or have not done something correctly--I failed to mention before I did anything I checked all the config settings and they were all default according to the manual--Any help out there ?? -- View this message in context: http://elecraft.365791.n2.nabble.com/ANTENNA-TUNER-on-KX3-PROBLEM-tp7581087.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html