John,
You will need the VFO Range select relays to get any VFO frequency that
is usable, and you need the bandpass filter relays to establish a path
through the BPF, and you will need the LPF relays to get a proper path
through the LPF. So get all the relays in before attempting any testing.
73,
Don W3FPR
On 11/28/2013 3:02 AM, wt5y wrote:
My k2 is almost ready for its initial power on test. Studying the schematics I
think its safe to do so before installing relays as I have not ordered those
yet, any reason it wont work?. Also won't have 1n5871 sb530 yet either. I
realize preatt bands and other switches won't work yet. And the diode was
reverse polarity protection for battery input. My plan was to install relays
as I need em. Would wait but anxious to try out tricolor led bargraph and see
it come on
John WT5Y
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
