There is a parameter initialization (EEINIT) procedure in the K3 owners manual. You will want to save the configuration first, because it resets all calibration and configuration, and you will need to be able to repeat all that or restore the configuration.
I presume you have a K3 Utility and access to the owners manual and a working PC connection to the radio. Reloading firmware might or might not help, and is less disruptive. Dick, K6KR Sent from my iPhone > On Nov 28, 2013, at 7:28, [email protected] wrote: > > All: > > Here on Curacao, one of the members' K3 stopped receiving abruptly this > morning, after he had called a couple of times and while he was just > listening. He said it sounded like someone disconnected the antenna. > > Neither the Main nor Subreceiver are hearing signals. Using Antenna 1, > Antenna 2, or RX antenna inputs makes no difference. > > The P3 display reflects changing the changing frequency (in digits, at top) > with the VFOs, but the noise pattern displayed does not change. > > We've eliminated everything outside of the radio in the RF path as a cause. > He went through the troubleshooting section of the manual. No Joy. > > This radio was carried down for the contest, and has only been here for 2 > weeks in our air-conditioned shack. No danger of salt air contamination, > which over time has "bad effects" on radios here! > > Is there a "reset defaults" command to return the radio to a known pristine > state, lest some parameter have been changed inadvertently? He reportedly > needed such a command for his P3 before travelling to Curacao last week. > > Thanks for any guidence. He'd rather not pack it up for travel back to the > States yet! > > (BTW, the PJ2T Multi-Multi operation this past weekend in CQWW CW was an > all-K3 affair, with five stations. No failures, no problems, and the largest > CQWW CW score ever for us! We appear to be second or third Worldwide > Multi-Multi.) > > 73, Jeff PJ2/K8ND > > [email protected] > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
