Same problem plus terrible audio. Fighting it for days and have given up. Sent from my Verizon Wireless 4G LTE DROID
"Poul Erik Karlshøj (PKA)" <[email protected]> wrote: >Just had a problem on the KPA+KAT setup while working on 80m last night. It >worked without any problems until that moment, so I'm confident something >really did change. >I have contacted Elecraft support, but it occurs to me that someone in this >forum might have had a similar experience and may know what has gone wrong. > >On a D.L. either directly on the KPA or via the KAT I have a high SWR on the >K3 (ATU in bypass mode) as soon as the KPA is set OPER. >I need K3 P= 60W to produce 500W into the D.L , but since the K3 SWR is so >high I don't know what power is received by the KPA. Before all this I needed >18W to get 500W out on 80m. > >With the KPA in STBY the KAT operates normally on both my antennas with K3 at >100W. >While still on the antenna with KAT having the C and L values found above, as >soon as I set KPA = OPER - even with K3 power set to 2W - I see a very high >SWR on both KPA and KAT, while the KPA indicates no current or output power. > >I am confused, but probably one single fault can explain this. >Anyone here knows? > >73 de OZ4UN >Poul-Erik > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
