And if u have a switch, wich shorts unused port to ground it should be even better :)))
> Switch the RX of unused radio to dummy load when transmitting with the other > one. > If you want to do it "perfect" , you can use low power coax relays (cx120 or > something smaller it depends on PWR u use) or better , transfer relays. > If u use high isolation switch between the two radios and one antenna it > should be enough :) > 100W is +50dBm and if u have a switch (manual or coaxial) with at least 60dB > of isolation it should not harm the other radio (-10dbm on ant port or > 0,1mW). > If u r using 5W QRP even better :) > > > 73's > Adi > S55M > 9A8WW > > > ----- Original Message ----- > From: "R March" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, November 15, 2005 12:08 AM > Subject: [Elecraft] K2 Muting > > > > I want to switch between a K2 and another XCVR. When I am transmitting on > > the other XCVR, the K2 should be muted. Can someone enlighten me as to > how > > best to mute the K2 (other than keying the transmit line)? Thanks, Bob > > N7UA > > > > _______________________________________________ > > Elecraft mailing list > > Post to: [email protected] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
