Chris,
There is no harm in that at all.
If you have a very long cable between your EC2 enclosure and the K2, you
may try shortening it.
I suggest you check the actual power output vs. the requested power
setting before attempting anything else.
73,
Don W3FPR
On 12/13/2013 2:52 PM, Chris Kimball wrote:
The manual I was looking at was KAT100 Revision A, Nov 5, 2002. (A vintage
manual!)
The current manual at the Elecraft site is KAT100 is Revision C, March 12,
2003, which on page 34 suggests putting "a 0.01 uF capacitor from pin 7 to
ground (inside the backshell)." for "Erratic power control with K2/100".
Should I try this?
Thanks,
Chris
NQ8Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
