Don,
Check the menu setting of 8R. It can be found as a DISPLAY option from
the T-R DLY menu. It should be set to HOLD. While you are at that menu
setting, be certain the T-R delay is set to .04 or greater.
If it persists *and* you have the KPA100 and the KDSP2 installed, make
sure the KPA100 is at the latest level with blue toroids at RFC1 and
L16. If you have an older KPA100, update it with KPA100UPKT.
73,
Don W3FPR
On 12/15/2013 8:57 AM, Don Baucom wrote:
I noticed when I send CW in addition to the sidetone there a thump sound that
I hear on each character or almost each character. It is not noticed on 40
meters. I can hear it some on 20. I hear it more on 12m and then it is the
strongest on 10 meters were it is very noticeable.
I don't hear it in the test Mode
Any Ideas?
73
Don
K4YND
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
