Great! Just what I wanted. Thank you John N3WT.
-----Original Message----- From: Dick Dievendorff [mailto:[email protected]] Sent: Wednesday, December 18, 2013 4:33 PM To: 'John Sweeney'; [email protected] Subject: RE: [Elecraft] k3 macro command for Speaker or Phones? I have PF1 set up to do this, toggle SPKR+PH on and off. It doesn't need a macro command. Use the K3 CONFG menu, navigate to SPKR+PH, and then hold PF1 (the RIT button). It says "PF1 Set". Then tap "Menu" to exit the menu. PF1 now toggles SPKR+PH. It takes a second or so after you HOLD PF1 for the speaker to turn off. 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Sweeney Sent: Wednesday, December 18, 2013 1:28 PM To: [email protected] Subject: [Elecraft] k3 macro command for Speaker or Phones? Trying to set up a macro command to assign to front panel switch, to go from speaker or phones plugged in rear, but not able to figure the full command. I got command which brings up the menu option, but not the rest with just the button press. Please someone give me the command sequence or lead me to the right page of the programming manual. Thank you. 73. John. N3WT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
