In the K3s menu there is a TX Delay setting. Maybe that will accomplish what you need.
73, John N1JM KD7YZ Bob wrote > Howdy K3' people: > > I use a sequencer which helps ensure that RF does not flow from the K3 > before a sensitive LNA is switched out of the RF path. > > This works if a foot-switch is pressed here. It works when the > Tigertronics "SignaLink USB" closes the sequencer's PTT input. > > However, the K3's "XMIT" button will key the rig and I see no wy to have > that action tell the Sequencer that it's internal PTT needs activation. > This would need doing prior do RF flowing. > > If there was a way that a delay could be chosen/set to follow the > pressing of XMIT button then I might try using the K3 PTT out or the > XV144 Key-Out. > > I would like to think I will not press the K3 XMIT button but that "ain't > gonna happen" as I am likely to use "XMIT" with a reduced output to tune > an external 2m PA . > > Or, sometimes I am just stupid and press XMIT anyway ... wouldn't be > nice to destroy an expensive LNA ..... especially in the middle of a > QSO with a severely weak station. > > -- > 73 > KD7YZ Bob > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto: > [email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ----- 73, John N1JM K3 #5986 P3 #1752 KPA500 #596 KX3 #926 XG3 XG1 sent from my MacBook Pro -- View this message in context: http://elecraft.365791.n2.nabble.com/Can-there-be-a-delay-before-xmit-after-pressing-the-XMIT-button-on-my-K3-tp7581832p7581833.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
