Commands are described in the K3 and KX3 Programmer's Reference, available from our manual page http://www.elecraft.com/K2_Manual_Download_Page.htm#K3
Look for the description of the FA and MD commands. FA; reads the frequency of VFO A. MD; reads the K3's mode. 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, December 19, 2013 9:54 AM To: [email protected] Subject: [Elecraft] K-3 rig interface for N3FJP Good Afternoon: I am a fairly new ham and new K3 owner. I have decided to try using the N3FJP logging SW. YES I know there are others out there but this is where I would like to start. Does any one know the K3 string to read frequency and mode that goes in the N3FJP rig interface as shown on pg 46 of the N3FJP manual. I cannot find it in the K3 manual or do not to know what to look under. Any and all help would be greatly appreciated. Gerald Muller KF5EYC [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
