Hi Dave,
Thanks for your response and, yes, this information is on page 15 of the
C2 manual as well. However, this tells you how the CMP/ALC display mode
gets activated. The problem I'm having is switching it back to SWR/RF.
You should be able to do this by tapping the Keyer/Mic knob and this is
working here on the bench this morning, however, in the field sometimes
this does not seem to work and I end-up stuck in CMP/ALC mode. It might
be finger trouble on my end but this has happened several times.
Can you confirm tapping the Keyer/Mic knob is the only way to switch
between these two display modes?
Many thanks,
Gary
K6YOA
On 12/22/2013 8:24 AM, dave wrote:
In manual Rev B4, page 15. Top right.
73 de dave
ab9ca
On 12/22/13 10:05 AM, Gary Hawkins wrote:
I use my KX3 almost exclusively for SOTA. I keep inadvertently
managing to get the display to switch from SWR/RF to CMP/ALC and can't
find a quick way to switch it back. This occurs not just when
adjusting Mic gain or CMP, although I do switch power levels
sometimes. Initially I thought this problem was associated with Hi
Curr (thanks for all the help on this issue) but it is not. Can
someone help please?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
