Allan,

I am in the process of building the 222 version.  Just a word of warning
that I received in an email from Elecraft.  Now, the caution about
disconnecting the antenna when transmitting close to the 222 antenna is
going to be a real PITA when working the contests!  Removing during
lightning storms is a no brainer!

73,  Lloyd  K8DIO





*One tip:The RF module usually has a depression in the middle, so if you
trim the thermal pad with scissors so it just fits within that depression,
it makes for a better clamping and improved heat transfer. Do not exceed
20w of RF output, and disconnect the antenna when lighting storms approach
or if you will be transmitting close to the XV222 antenna with another rig.*

On Fri, Dec 27, 2013 at 11:11 AM, Don Wilhelm <[email protected]> wrote:

> Follow the instructions in the manual and you will be successful. Do the
> steps in order.
> Do not mix up the shielded inductors is the only specific warning that I
> can offer.  I have built many of the XV transverters.
>
> 73,
> Don W3FPR
>
>
> On 12/27/2013 9:55 AM, Allan Taylor wrote:
>
>> I am about to begin the build of a 144XV transverter. Before I venture
>> forth,
>> though, I would like to request the advice of those here who have built
>> this
>> 2m transverter. Any specific warnings that apply to it?   I have just
>> completed
>> the install of the K60XV mod / kit so that work on the K2 is already done.
>>
>>
>  ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to