Vic, OK , Same here , And right when I'm setup to use that feature .
73 Ken K5DNL / WG2XXM On Saturday, December 28, 2013 10:43 PM, Vic Rosenthal K2VCO <[email protected]> wrote: Hello folks, I sent this to Support, but they are probably resting up until Monday, so I thought I would ask here. Has anyone had this problem with the W2 wattmeter? I just assembled my unit. It seems to work correctly except that I can't enable the alarm function. 1. When I turn the W2 on, I hear the relay click, and it does interrupt the ptt at this point. 2. The W2 utility program (USB, running on XP) finds and communicates with the W2. When I click on the ALARM button, the label changes from OFF to ON. 3. But when I test it by transmitting into a 'wrong' antenna (SWR=13:1) it does not flash LEDs or activate the relay. 4. Firmware is 1.00 and utility program is also 1.00. Has anyone had a similar problem? -- Vic K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
