Hi Jim, This is something we hope to minimize in a future firmware release. Meanwhile, here are some things you can try:
- cut the lowest 3 audio receive equalization bands by a significant amount in CW mode (RX EQ menu entry) - reduce the receiver's DSP bandwidth in CW mode (try 100-300 Hz) - use a non-zero QSK delay - turn on the noise blanker and setting it to a low level - turn on the noise reduction and setting it to a low level - use headphones with less bass response The T/R artifact you're hearing is usually a result of using headphones with extremely low bass response in combination with one or more of the following: low supply voltage, high transmit current into a low-Z load, and very high band noise. 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
