The K3 and P3 work quite well with Rumlog. Connect things normally: K3 <--> P3, P3 <—> USB Interface, USB Interface <—> Macintosh. Then look at how the serial interface is configured for Rumlog. It most likely needs to be set to 38400bps to properly communicate with the P3/K3.
Most likely the problem is in the Rumlog configuration. 73 & HNY Jack B, W6FB On Dec 31, 2013, at 12:25 PM, Ricardo PY2PT <[email protected]> wrote: > Dear friends, > > First of all, happy new year for everybody! > So, after some years i decided to give Up from all interfaces!! > Now, I'm using The k3 with P3 And connected the usb cable on computer And on > The back of P3. > Everything is ok with P3 but i cant use The cat with my log program -Rumlog. > Só, i need to buy a rs232 Splitter do do it? > > Best regards > > Ricardo Rodrigues > PY2PT / PX2F / 3D2PT / T30PT / T33PT > [email protected] > http://www.py2pt.com > @ricrodrigues > T33A team member (2013) > 8R1PY team member (2012) > T30PY/T30SIX team member (2012) > TO2FH (Mayotte Island - 2011) team member > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
