Joe...
This is great. Thanks for the information. One frustration down in my life.....a couple of million to go. Lee - K0WA In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? Common Sense is the image of the Creator expressing revealed truth in my mind. - John W. (Kansas) Never interfere with anything that isn't bothering you. ________________________________ From: "Joe Subich, W4TV" <li...@subich.com> To: Elecraft Reflector <elecraft@mailman.qth.net>; k6...@foothill.net Sent: Sunday, January 5, 2014 8:50 PM Subject: Re: [Elecraft] K3 - AFSK RTTY In N1MM -> Config -> Configure Ports, Mode Control, Audi, Other -> Mode Control ... make sure you have set the RTTY mode to *AFSK* and not *RTTY* if you are using AFSK. For more information read the very fine N1MM Logger on-line documentation. 73, ... Joe, W4TV On 1/5/2014 9:26 PM, Rick Tavan N6XI wrote: > Here is one thing that will cause a similar problem: If you program a > memory while DATA MD is X, then every time you recall that memory you will > be put back into X, regardless of the DATA MD setting prior to the memory > recall. You might have set the memory years ago when using FSK D and now > are using AFSK A. Use the memory, go directly to FSK D. This bit me several > times this weekend. However, I don't see an obvious connection between > memory recall and N1MM band map clicking. > > /Rick > > > On Sun, Jan 5, 2014 at 5:14 PM, Fred Jensen <k6...@foothill.net> wrote: > >> What would a contest be if everything always worked like it did the last >> time in the contest. >> >> I use a minimalist RTTY setup: >> >> 2 stereo cables from LINE IN/OUT to LINE OUT/IN >> AFSK-A with PTT from VOX >> N1MM with one instance of MMTTY >> >> Basically, it worked fine, made over 700 Q's. At the urging of the club, >> I decided on the new SO Unlimited [i.e. assisted], and that worked OK too >> except: >> >> Every time I clicked on a band map spot, the radio went to FSK-D, and of >> course wouldn't key. I had the couple of usual N1MM lockouts and >> re-starting N1MM also caused this change to FSK-D. >> >> I'm running 4.58 FW, haven't loaded new in a long time, and N1MM is >> running 13.10.2, also haven't updated that in quite awhile, both have been >> working very well. >> >> I don't think this is a K3 problem, but wanted to check if anyone else >> using the minimalist configuration has seen this. >> >> 73, >> >> Fred K6DGW >> - Northern California Contest Club >> - CU in the 2014 Cal QSO Party 4-5 Oct 2014 >> - www.cqp.org >> >> Go SF! >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
