Hi Fred Reading the L and C ATU Values 1. Select LC SEt in the CONFIG menu. 2. Tap MENU to exit. 3. Tap ATU TUNE; VFO A shows the capacitance (CA indicates the capacitance on the antenna side, Ct on the transmitter side). VFO B shows the inductance. 4. Tap MENU to exit. Manually Setting L and C Values 1. Select LC SEt in the CONFIG menu. 2. Tap MENU to exit. 3. Tap ATU TUNE; VFO A shows the capacitance (CA indicates the capacitance on the antenna side, Ct on the transmitter side). VFO B shows the inductance. 4. Tune VFO A to change the capacitance; VFO B to change the inductance. Tap ANT to toggle between CA and Ct. 5. Tapping CLR clears the stored LC data for the present band.
Fred Cady KE7X "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the Summit" www.ke7x.com or www.lulu.com (Coming soon: "The Elecraft KPA500 and KAT500 - the K-Line Dream Station") > -----Original Message----- > From: [email protected] [mailto:elecraft- > [email protected]] On Behalf Of WY2E > Sent: Tuesday, January 07, 2014 1:14 PM > To: [email protected] > Subject: [Elecraft] K3 Internal Tuner > > Anyone know how to read the settings of the K3 internal ATU after a > tune > cycle. I want to compare to my KAT500. > > > TNX 73 Fred, WY2E > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
